Product Search

    SEARCH NOW FOR ALL YOUR ROBB JACK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Cutting HSS & Solid Carbide / End Mill

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Filter Results
    Sorting/Paging
    Results 351-400 of 500.
    ROBB JACK SS-2-037

    ROBB JACK

    SS-2-037

    0.037", 0.0555" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIE ...
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK SS-2-035

    ROBB JACK

    SS-2-035

    SQUARE END MILL: 0.035'' DIA, 0.0525'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK ST-343-04-A

    ROBB JACK

    ST-343-04-A

    1/8" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 1-1/2" OAL, 1/2" LOC, 1/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €50.04 Buy Surplus As Low As €30.22
    €30.22
    ROBB JACK SS-2-041

    ROBB JACK

    SS-2-041

    SQUARE END MILL: 0.041'' DIA, 0.0615'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK SS-2-043

    ROBB JACK

    SS-2-043

    SQUARE END MILL: 0.043'' DIA, 0.0645'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK SS-2-036

    ROBB JACK

    SS-2-036

    SQUARE END MILL: 0.036'' DIA, 0.054'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK ST-343-08-C

    ROBB JACK

    ST-343-08-C

    1/4" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 3/4" LOC, 1/4" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €86.87 Buy Surplus As Low As €52.88
    €52.88
    ROBB JACK SS-2-047-BN

    ROBB JACK

    SS-2-047-BN

    0.047" DIAM, 0.0705" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 1-1/2" OAL, 1/8" SHANK DIAM, SPIRAL FLUTE
    €42.49 Buy Surplus As Low As €25.49
    €25.49
    ROBB JACK SS-2-047

    ROBB JACK

    SS-2-047

    SQUARE END MILL: 3/64'' DIA, 0.0705'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-045

    ROBB JACK

    SS-2-045

    SQUARE END MILL: 0.045'' DIA, 0.0675'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK ST-430-06-T

    ROBB JACK

    ST-430-06-T

    SQUARE END MILL: 3/16'' DIA, 5/8'' LOC, 3/16'' SHANK DIA, 2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, TIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES ST-430
    €74.59 Buy Surplus As Low As €45.32
    €45.32
    ROBB JACK SS-2-059

    ROBB JACK

    SS-2-059

    SQUARE END MILL: 0.059'' DIA, 0.0885'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-054

    ROBB JACK

    SS-2-054

    0.054", 0.081" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-053

    ROBB JACK

    SS-2-053

    0.053", 0.0795" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIE ...
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-044

    ROBB JACK

    SS-2-044

    SQUARE END MILL: 0.044'' DIA, 0.066'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK SS-2-040

    ROBB JACK

    SS-2-040

    SQUARE END MILL: 0.04'' DIA, 1/16'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €32.10 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK ST-343-24-C

    ROBB JACK

    ST-343-24-C

    3/4" DIAM 3 FLUTE SOLID CARBIDE 0.011 TO 0.014" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 4" OAL, 1-1/2" LOC, 3/4" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €340.87 Buy Surplus As Low As €204.90
    €204.90
    ROBB JACK SS-2-057

    ROBB JACK

    SS-2-057

    SQUARE END MILL: 0.057'' DIA, 0.0855'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-051

    ROBB JACK

    SS-2-051

    0.051", 0.0765" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIE ...
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-048

    ROBB JACK

    SS-2-048

    SQUARE END MILL: 0.048'' DIA, 0.072'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK ST-430-09-T

    ROBB JACK

    ST-430-09-T

    9/32", 3/4" LOC, 5/16" SHANK DIAM, 2-1/2" OAL, 4 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ST-430
    €92.53 Buy Surplus As Low As €55.71
    €55.71
    ROBB JACK SS-2-060

    ROBB JACK

    SS-2-060

    SQUARE END MILL: 1/16'' DIA, 3/32'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-056

    ROBB JACK

    SS-2-056

    0.056", 0.084" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK SS-2-055

    ROBB JACK

    SS-2-055

    SQUARE END MILL: 0.055'' DIA, 0.0825'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK ST-430-12-T

    ROBB JACK

    ST-430-12-T

    3/8", 7/8" LOC, 3/8" SHANK DIAM, 2-1/2" OAL, 4 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ST-430
    €112.36 Buy Surplus As Low As €67.98
    €67.98
    ROBB JACK ST-341-06-A

    ROBB JACK

    ST-341-06-A

    3/16" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2" OAL, 3/8" LOC, 3/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €64.21 Buy Surplus As Low As €38.71
    €38.71
    ROBB JACK SS-4-055

    ROBB JACK

    SS-4-055

    SQUARE END MILL: 0.055'' DIA, 0.0825'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
    €33.05 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK ST-341-08-C

    ROBB JACK

    ST-341-08-C

    1/4" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 1/2" LOC, 1/4" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €73.65 Buy Surplus As Low As €44.38
    €44.38
    ROBB JACK ST-434-20-A

    ROBB JACK

    ST-434-20-A

    5/8" DIAM 4 FLUTE SOLID CARBIDE 0.009 TO 0.011" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3-1/2" OAL, 1-1/4" LOC, 5/8" SHANK DIAM, 30° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €257.78 Buy Surplus As Low As €154.85
    €154.85
    ROBB JACK ST-341-08-A

    ROBB JACK

    ST-341-08-A

    1/4" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2-1/2" OAL, 1/2" LOC, 1/4" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €73.65 Buy Surplus As Low As €44.38
    €44.38
    ROBB JACK SS-4-047

    ROBB JACK

    SS-4-047

    SQUARE END MILL: 3/64'' DIA, 0.0705'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
    €33.05 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK SS-4-031

    ROBB JACK

    SS-4-031

    SQUARE END MILL: 1/32'' DIA, 0.0465'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
    €40.60 Buy Surplus As Low As €24.55
    €24.55
    ROBB JACK SS-2-058

    ROBB JACK

    SS-2-058

    SQUARE END MILL: 0.058'' DIA, 0.087'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
    €31.16 Buy Surplus As Low As €18.88
    €18.88
    ROBB JACK ST-434-16-A

    ROBB JACK

    ST-434-16-A

    1/2" DIAM 4 FLUTE SOLID CARBIDE 0.006 TO 0.009" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3" OAL, 1" LOC, 1/2" SHANK DIAM, 30° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €163.35 Buy Surplus As Low As €98.20
    €98.20
    ROBB JACK ST-341-06-C

    ROBB JACK

    ST-341-06-C

    3/16" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2" OAL, 3/8" LOC, 3/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €64.21 Buy Surplus As Low As €38.71
    €38.71
    ROBB JACK SS-4-060

    ROBB JACK

    SS-4-060

    SQUARE END MILL: 1/16'' DIA, 3/32'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
    €33.05 Buy Surplus As Low As €19.83
    €19.83
    ROBB JACK ST-341-10-A

    ROBB JACK

    ST-341-10-A

    5/16" DIAM 3 FLUTE SOLID CARBIDE 0.004 TO 0.006" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2-1/2" OAL, 1/2" LOC, 5/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €82.15 Buy Surplus As Low As €50.04
    €50.04
    ROBB JACK ST-630-12-T

    ROBB JACK

    ST-630-12-T

    3/8", 7/8" LOC, 3/8" SHANK DIAM, 2-1/2" OAL, 6 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES S ...
    €112.36 Buy Surplus As Low As €67.98
    €67.98
    ROBB JACK ST-341-12-C

    ROBB JACK

    ST-341-12-C

    3/8" DIAM 3 FLUTE SOLID CARBIDE 0.005 TO 0.007" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 5/8" LOC, 3/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €93.48 Buy Surplus As Low As €56.65
    €56.65
    ROBB JACK ST-341-04-C

    ROBB JACK

    ST-341-04-C

    1/8" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 1-1/2" OAL, 1/4" LOC, 1/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €43.43 Buy Surplus As Low As €26.44
    €26.44
    ROBB JACK ST-343-10-C

    ROBB JACK

    ST-343-10-C

    5/16" DIAM 3 FLUTE SOLID CARBIDE 0.004 TO 0.006" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 13/16" LOC, 5/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €96.31 Buy Surplus As Low As €58.54
    €58.54
    ROBB JACK ST-646-12-A

    ROBB JACK

    ST-646-12-A

    3/8" DIAM 6 FLUTE SOLID CARBIDE 0.005 TO 0.007" CORNER RADIUS END MILL ALTIN FINISH, 2-1/2" OAL, 7/8" LOC, 3/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €122.75 Buy Surplus As Low As €73.65
    €73.65
    ROBB JACK ST-341-20-A

    ROBB JACK

    ST-341-20-A

    5/8" DIAM 3 FLUTE SOLID CARBIDE 0.009 TO 0.011" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3-1/2" OAL, 3/4" LOC, 5/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €219.06 Buy Surplus As Low As €132.19
    €132.19
    ROBB JACK ST-343-16-C

    ROBB JACK

    ST-343-16-C

    1/2" DIAM 3 FLUTE SOLID CARBIDE 0.006 TO 0.009" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 3" OAL, 1" LOC, 1/2" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €153.91 Buy Surplus As Low As €92.53
    €92.53
    ROBB JACK STR-301-12-C

    ROBB JACK

    STR-301-12-C

    3/8" DIAM, FINE PITCH, 5/8" LOC, 3 FLUTE SOLID CARBIDE ROUGHING SQUARE END MILL TICN FINISH, 2-1/2" OAL, 3/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 30° HELIX
    €129.36 Buy Surplus As Low As €78.37
    €78.37
    ROBB JACK ST-343-08-A

    ROBB JACK

    ST-343-08-A

    1/4" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2-1/2" OAL, 3/4" LOC, 1/4" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €86.87 Buy Surplus As Low As €52.88
    €52.88
    ROBB JACK ST-343-16-A

    ROBB JACK

    ST-343-16-A

    1/2" DIAM 3 FLUTE SOLID CARBIDE 0.006 TO 0.009" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3" OAL, 1" LOC, 1/2" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €153.91 Buy Surplus As Low As €92.53
    €92.53
    ROBB JACK ST-430-05-T

    ROBB JACK

    ST-430-05-T

    SQUARE END MILL: 5/32'' DIA, 9/16'' LOC, 3/16'' SHANK DIA, 2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, TIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES ST-430
    €67.04 Buy Surplus As Low As €40.60
    €40.60
    ROBB JACK STR-301-14-C

    ROBB JACK

    STR-301-14-C

    7/16" DIAM, FINE PITCH, 5/8" LOC, 3 FLUTE SOLID CARBIDE ROUGHING SQUARE END MILL TICN FINISH, 2-3/4" OAL, 7/16" SHANK DIAM, SINGLE END, CENTERCUTTING, 30° HELIX
    €175.63 Buy Surplus As Low As €105.75
    €105.75
    ROBB JACK ST-343-12-C

    ROBB JACK

    ST-343-12-C

    3/8" DIAM 3 FLUTE SOLID CARBIDE 0.005 TO 0.007" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 7/8" LOC, 3/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
    €112.36 Buy Surplus As Low As €67.98
    €67.98
    Previous Next
    1 2 3 4 5 6 7 8 9 10